DTX8 Serial LED Driver

	Home | Products | Distributors | Documentation & Support | DCC | CV Calculators | Links
DAC10 DTM30 SIGM20 DTX8 LocoShuttle Locoanalyse DTM16 Accessories	The DTX8 is an add-on board to drive LEDs and can be used in two different ways: The DTX8A can be used with the DAC10, and drives LEDs for each of the "closed" and "thrown" aspects to show the position of each point; The DTX8B drives an additional 8 LEDs allowing 2 extra signals to be added to the SIGM20.   The board can be constructed directly by users who have the appropriate electronics skills. The schematic for the board is available here. Alternatively we supply two versions: The DTX8A includes the board as shown, plus two 2' ribbon cables to connect to LEDs. The DTX8B includes the board as shown, plus one 2' ribbon cable to connect to LEDs. for either version: if longer cables are required, either assemble them yourself (the parts are readily available; for information see here) or contact us. Notes for using the DTX8A with a DAC10 Notes for using the DTX8B with a SIGM20 Prices The DTX8 is available for £12 as an assembled & tested board. Two separate versions are available: the DTX8A for DAC10, and DTX8B for SIGM20. Ordering Information Order Online!
	©CML Electronics Limited 2008 Page Last Modified on: