Sales
Products may be ordered:
- On-line from this website
- direct from CML Electronics Limited
- via a UK distributor
- via an overseas distributor
To order direct, send a cheque valid in the UK to the address below (a cheque drawn on a major clearing bank is normally OK; a postal order from outside the UK is not). Cheques must be payable to "CML Electronics Limited" please.
Ordering Address:
Export Orders
Export orders are welcomed. Our preferred method for mthis is therough the online ordering page. Shipping charges are already included. There is a link to a currency converter web page on the product pricing page.
Note that products are shipped airmail through the postal system. There may (or may not) be local taxes payable on delivery depending on the local country's rules. Many countries do not levy taxes on model railway products but it is beyond our control!
List Prices
Current list prices for our products are shown below. There is also a currency calculation option which will estimate the prices in other currencies. This is only an estimate: if you purchase on-line, the conversion to your currency will be done by Paypal at their rate.
If you purchase from us, the-prices in UK GB pounds are the prices our website will charge. If you purchase from a distributor, they are free to set prices themselves, so they may not be the same.
| Code | Description | Price | Currency estimator |
| Shipping |
for orders < £10: for orders £10- £24.99: for orders £25-£49.99: for orders £50-£149.99: for orders above £150 |
£1.00 £2.00 £4.00 £6.00 £8.00 |
|
| DAC10 | 8 channel accessory decoder | £65.00 | click |
| DAC20 | 8 channel advanced accessory decoder | £65.00 | click |
|
DAC10 to
DAC20 upgrade
|
Processor upgrade to DAC20 standard | £10.00 | click |
| DTM30 | 30 channel Super Tower Master | £63.00 | click |
| SIGM20 | 8 channel automatic signal controller | £54.00 | click |
| DSS1 | LocoShuttle automatic sequence controller | £60.00 | click |
| DTX8A | Add-on LED driver for DAC10 | £15.00 | click |
| DTX8B | Add-on LED driver for SIGM20 | £15.00 | click |
| CP_SIGM20 | Ribbon cable to connect 2xBD4 to SIGM20 | £4.00 | click |
| CP_DSS1 | Ribbon cable to connect BD4 to DSS1 | £3.50 | click |
| DTX8A_CB1 | Additional length of cable for DTX8A | £0.50/ft | |
| DTX8B_CB1 | Additional length of cable for DTX8B | £0.25/ft | |
| SW_P1 | Pack of 8 miniature pushbutton switches for use with DTM30. | £4.00 | click |
| LED_P1 | Pack of 8 red 3mm LED + panel clips for DTM30 | £2.00 | click |
| LED_P2 | Pack of 8 green 3mm LED + panel clips for DTM30 | £2.00 | click |
| LED_P3 | Pack of 8 bi-colour 5mm LED + panel clips for DTM30 | £3.00 | click |
| LED_P4 | Pack of 8 yellow 3mm LED + panel clips for DTM30 | £2.00 | click |
| RLY2 | 2 pole DPDT relay, PCB mounted | £8.50 | click |
| LNPLG1 | LocoNet shorting plug, for some small Zephyr installations | £2.00 | click |
